How Do You Draw a Helicopter?
Drawing a helicopter can be a fun and creative activity, but it can also be a bit challenging if you’re new to drawing. In this article, we’ll break down the steps to help you draw a helicopter, from the basic shapes to the details. So, let’s get started!
Step 1: Sketch the Basic Shape
The first step in drawing a helicopter is to sketch the basic shape. You can start by drawing a large oval or egg-shaped body. The body of the helicopter should be symmetrical, meaning that it should be the same on both sides.
Here’s a tip: try to draw the body as a smooth, continuous shape, without any sharp angles or corners.
Step 2: Add the Fuselage
The fuselage is the main body of the helicopter, and it’s where the passengers and cargo are carried. To add the fuselage, draw a long, curved shape that connects to the top of the body. The fuselage should be slightly tapered, meaning that it should be wider at the top than at the bottom.
Here’s a tip: try to draw the fuselage in a gentle, sweeping curve, without any sharp corners or edges.
Step 3: Add the Rotor Blades
The rotor blades are the long, spinning blades that make the helicopter lift off the ground. To add the rotor blades, draw four long, curved shapes that connect to the top of the body. The blades should be symmetrical, meaning that they should be the same on both sides.
Here’s a tip: try to draw the blades in a gentle, curved shape, without any sharp corners or edges. The blades should also be angled, meaning that they should be tilted slightly away from the body of the helicopter.
Step 4: Add the Tail Rotor
The tail rotor is a small rotor that counteracts the torque created by the main rotor blades. To add the tail rotor, draw a small, circular shape with a long, curved blade that connects to the bottom of the body.
Here’s a tip: try to draw the tail rotor in a small, circular shape, without any sharp corners or edges. The tail rotor should also be angled, meaning that it should be tilted slightly away from the body of the helicopter.
Step 5: Add the Wheels and Landing Gear
The wheels and landing gear are what allow the helicopter to take off and land safely. To add the wheels and landing gear, draw two small circles for the wheels and two long, curved shapes for the landing gear.
Here’s a tip: try to draw the wheels and landing gear in a small, rounded shape, without any sharp corners or edges. The landing gear should also be angled, meaning that it should be tilted slightly away from the body of the helicopter.
Step 6: Add the Cockpit and Windows
The cockpit is the front of the helicopter where the pilot sits. To add the cockpit, draw a small, rectangular shape with a curved roof. Add two small windows on either side of the cockpit.
Here’s a tip: try to draw the cockpit in a small, rectangular shape, without any sharp corners or edges. The windows should also be rounded, meaning that they should be curved and not sharp.
Step 7: Add the Details
The final step in drawing a helicopter is to add the details. You can add details such as the instruments, seats, and doors to the cockpit. You can also add details such as the tail lights and navigation lights to the rear of the helicopter.
Here’s a tip: try to keep the details simple and uncluttered, as too many details can make the drawing look busy and confusing.
Tips and Tricks
Here are some additional tips and tricks to help you draw a helicopter:
- Use reference images: Drawings of helicopters can be helpful in getting the proportions and details correct.
- Use the right tools: Use a pencil or pen that you’re comfortable with, and make sure you have a eraser handy.
- Take your time: Drawing a helicopter can be a complex task, so take your time and don’t rush through it.
- Practice makes perfect: The more you practice drawing, the better you’ll become.
Drawing a Helicopter: Conclusion
Drawing a helicopter may seem like a daunting task, but with these steps and tips, you should be able to create a beautiful and detailed drawing. Remember to take your time, use reference images, and keep the details simple and uncluttered. Happy drawing!
Helicopter Drawing Template
Here’s a template to help you draw a helicopter:
Body
- Oval or egg-shaped
- Symmetrical
- Long, curved shape
Fuselage
- Long, curved shape
- Tapered
- Connects to top of body
Rotor Blades
- Four long, curved shapes
- Symmetrical
- Angled
- Connects to top of body
Tail Rotor
- Small, circular shape
- Angled
- Long, curved blade
- Connects to bottom of body
Wheels and Landing Gear
- Two small circles for wheels
- Two long, curved shapes for landing gear
- Angled
- Connects to bottom of body
Cockpit and Windows
- Small, rectangular shape
- Curved roof
- Two small windows on either side
- Connects to front of body
Details
- Instruments
- Seats
- Doors
- Tail lights
- Navigation lights
Reference Images
- Drawings of helicopters
- Photographs of helicopters
- Online images of helicopters
