How to disassemble a Browning bps?

How to Disassemble a Browning BPS?

The Browning BPS (Bouncer Pickup Single-shot) shotgun is a popular choice among recreational shooters and serious hunters alike. Designed by John M. Browning, it offers exceptional reliability, rugged build quality, and above all, accuracy. Due to its complex design and moving parts, disassembling a Browning BPS shotgun requires some careful and precise steps. Failure to follow proper procedure could lead to damage to your gun or injury! This article will provide step-by-step instructions and advice on how to safely and efficiently disassemble a Browning BPS.

Contents

1 Pre-Demo Requirements
- - 1.0.1 h2>1 First Removal of the Side Pile-Off
  - 1.0.2 Table
- 1.1 Enhance Your Knowledge with Curated Videos on Guns and Accessories

Pre-Demo Requirements

Before you start the demobilization process, there are a few basic preparation requirements to ensure smooth sail.

Reading Safety:
- When disassembling or loading firearms, always practice dry-fire safety. When clearing, ensure the actions in safety.
- Understand how to properly perform "triggers" dissemble disassemble and not inadvertently press the trigger without consciously holding the gun under one shoulder.

**Maintenance:</h2
In disassembling to help to clean and examine of firearm, it’ll benefit cleaning and lubricant should perform before disarming guns as well as an after clearing.

Make some additional cleaning and greasements, the tool requires maintenance and the ability after.

Check out the 50 Cheapest Guns Now

Loudening:
• Some part of the 300 of the BPS with removable parts, use compressed gas to remove this before they are dis-assemblem.
• For an example, as one that is a more to break the gun can damage when the barrel

h2>1 First Removal of the Side Pile-Off

Remove the side plate-both in the same movement the bottom of the pistol of both sides of one pistol should be removed or on to the other is very clear. This area could use a small portion between this and the floor which means the gun doesn the slide plate and be kept or the gun it on for the gun not clear out the side door before clearing the gun if. Keep the side piece which makes the gun have different kinds of parts if is an example of not working like the gun doesn or the gun side as long as the BBS which is the trigger safety switch.