How to Put a Bolt in a Savage 110
The Savage 110 is a popular hunting rifle known for its reliability and accuracy. One of the most critical components of the rifle is the bolt, which plays a vital role in the rifle’s functioning. In this article, we will guide you on how to put a bolt in a Savage 110, ensuring a proper and secure installation.
Understanding the Bolt and Its Components
Before we dive into the installation process, it’s essential to understand the bolt and its components. The bolt is a cylindrical piece of metal that serves as the heart of the rifle. It is responsible for closing and opening the rifle’s action, extracting and ejecting spent cartridges, and chambering new rounds.
The bolt is typically composed of the following components:
- Bolt head: The front portion of the bolt that mates with the rifle’s receiver and chamber.
- Bolt body: The main body of the bolt that contains the firing pin and extractors.
- Handle: The rear portion of the bolt that is held by the shooter.
- Ejector: A mechanism that removes spent cartridges from the chamber.
- Extractor: A mechanism that removes spent cartridges from the chamber.
Tools Needed
Before starting the installation process, make sure you have the following tools:
- Bolt removal tool (optional but recommended)
- Rifle wrench (included with the rifle)
- Torch or heat source (optional)
- Safety glasses
- Gloves
Step-by-Step Guide to Installing a Bolt in a Savage 110
Step 1: Remove the Existing Bolt
If you are installing a new bolt, start by removing the existing bolt from the rifle. You can use a bolt removal tool to help prevent damage to the bolt or the rifle. If the bolt is stuck, use a rifle wrench to carefully pry it loose.
| Step 1: Removing the Existing Bolt |
|---|
| • Remove the bolt from the rifle |
| • Set the bolt aside for disposal or replacement |
Step 2: Inspect and Clean the Bolt Hole
Before installing the new bolt, inspect the bolt hole in the rifle’s receiver for any debris or residue. Clean the area using a brush and a rag to ensure a smooth and secure installation.
| Step 2: Inspecting and Cleaning the Bolt Hole |
|---|
| • Inspect the bolt hole for debris or residue |
| • Clean the area using a brush and a rag |
Step 3: Install the Bolt
Hold the bolt with the bolt head facing downwards and align it with the bolt hole in the rifle’s receiver. Use the rifle wrench to guide the bolt into place and ensure it is properly seated.
| Step 3: Installing the Bolt |
|---|
| • Hold the bolt with the bolt head facing downwards |
| • Align the bolt with the bolt hole in the receiver |
| • Use the rifle wrench to guide the bolt into place |
Step 4: Torque the Bolt
Use a torque wrench to tighten the bolt in a clockwise direction until it reaches the recommended torque specification (usually around 40-50 ft-lbs). Do not overtighten the bolt as this can damage the rifle or the bolt.
| Step 4: Torquing the Bolt |
|---|
| • Use a torque wrench to tighten the bolt in a clockwise direction |
| • Do not overtighten the bolt |
Step 5: Verify the Bolt Installation
Use a scope or bore light to verify that the bolt is properly installed and aligned. Make sure the bolt head is seated properly in the receiver and the handle is free from any obstruction.
| Step 5: Verifying the Bolt Installation |
|---|
| • Use a scope or bore light to verify the bolt installation |
| • Ensure the bolt head is seated properly in the receiver |
| • Verify the handle is free from any obstruction |
Additional Tips and Precautions
- Always follow the manufacturer’s instructions for the specific Savage 110 model you are working with.
- Make sure to wear safety glasses and gloves to protect yourself from any debris or damage.
- Use a torque wrench to avoid damaging the rifle or the bolt.
- Avoid using excessive force or violence when installing the bolt, as this can damage the rifle or the bolt.
In conclusion, installing a bolt in a Savage 110 requires careful attention to detail and a thorough understanding of the rifle’s components and mechanics. By following the step-by-step guide provided above and taking the necessary precautions, you can ensure a proper and secure installation of the bolt.
