How to Reblue a Gun with Perma Blue?
Rebluing a gun with Perma Blue is a process of restoring the bluing on a firearm, which is a protective layer that prevents rust and corrosion. The process involves applying a blueing solution to the metal surfaces of the gun, followed by a series of cleaning and polishing steps. In this article, we will guide you through the steps of rebluing a gun with Perma Blue.
Why Reblue a Gun?
Rebluing a gun is an essential process to maintain its integrity and longevity. The bluing process protects the metal surfaces from rust and corrosion, which can lead to serious damage to the gun’s components and functionality. Rebluing a gun also helps to:
• Enhance its aesthetic appeal by restoring the original blue color
• Prevent rust and corrosion
• Improve the gun’s performance and accuracy
• Increase its overall value
Materials Needed
To reblue a gun with Perma Blue, you will need the following materials:
• Perma Blue bluing solution
• Soft cloth
• Wire brush
• Steel wool
• Toothbrush
• Cotton balls
• Rubber gloves
• Water
• Clean rags
Step-by-Step Instructions
Here is a step-by-step guide on how to reblue a gun with Perma Blue:
Contents
Step 1: Clean the Gun
Remove all cosmoline and debris
Use a wire brush and steel wool to remove all cosmoline and debris from the gun’s surfaces. This is important to ensure a smooth and even application of the Perma Blue solution.
Step 2: Apply Perma Blue Solution
Apply a thin layer of Perma Blue solution
Use a soft cloth to apply a thin layer of Perma Blue solution to the gun’s surfaces. Make sure to apply the solution evenly and avoid pooling.
Step 3: Wait and Rinse
Let the solution sit for 30 minutes to an hour
Allow the Perma Blue solution to sit on the gun’s surfaces for 30 minutes to an hour. Then, use a clean rag to rinse the solution off the gun.
Step 4: Repeat the Process
Repeat steps 2 and 3 for a total of 3-4 applications
Repeat steps 2 and 3 for a total of 3-4 applications. This will help to build up a thick and even layer of blueing.
Step 5: Neutralize and Rinse
Use a vinegar solution to neutralize the Perma Blue
Use a 50/50 solution of water and white vinegar to neutralize the Perma Blue solution. Dip a clean cloth into the solution and wipe down the gun’s surfaces to remove any remaining blueing.
Step 6: Dry and Inspect
Dry the gun and inspect for any remaining imperfections
Use a clean rag to dry the gun and inspect for any remaining imperfections. Use steel wool to smooth out any rough spots.
Tips and Tricks
• Always work in a well-ventilated area when applying Perma Blue solution
• Avoid applying the solution in direct sunlight or extreme temperatures
• Use a brush to apply the solution to small crevices and grooves
• Use cotton balls to remove any excess solution
• Avoid touching the blueing solution with your bare hands, as oils from your skin can interfere with the bluing process
Troubleshooting
• If the blueing solution doesn’t adhere properly, try cleaning the gun’s surfaces again and reapplying the solution
• If the blueing solution forms a sticky or tacky film, try rinsing the gun with a mixture of equal parts water and white vinegar
• If the blueing solution leaves a white residue, try cleaning the gun’s surfaces with steel wool and reapplying the solution
Conclusion
Rebluing a gun with Perma Blue is a simple and effective process that can help to restore the gun’s original appearance and functionality. By following the steps outlined in this article, you can achieve professional-looking results without the need for expensive gunsmithing services. Remember to always work in a well-ventilated area, avoid touching the blueing solution with your bare hands, and take your time to ensure a smooth and even application.
