How to remove the bolt on a Remington 700?

How to Remove the Bolt on a Remington 700: A Step-by-Step Guide

The Remington 700 is a popular and reliable bolt-action rifle, known for its accuracy and durability. However, removing the bolt can be a daunting task for many shooters, especially for those who are new to firearms. In this article, we will provide a step-by-step guide on how to remove the bolt on a Remington 700, along with some important tips and precautions to keep in mind.

Before You Start

Before attempting to remove the bolt, make sure you have the following:

• A Remington 700 rifle
• A bolt-removing tool (available at most gun shops or online)
• A clean and well-lit work area
• A understanding of the rifle’s mechanism and safety features

Removing the Bolt

To remove the bolt, follow these steps:

Step 1: Ensure the Rifle is Unloaded

Before attempting to remove the bolt, make sure the rifle is unloaded and the action is open. This is crucial to ensure your safety and prevent any accidental discharges.

Step 2: Locate the Bolt

The bolt is located at the rear of the rifle, and it’s held in place by a series of pins and retaining rings. Identify the bolt handle and the bolt head, which is the part that protrudes from the receiver.

Step 3: Remove the Retaining Rings

To remove the bolt, you need to remove the retaining rings that hold it in place. You can use a bolt-removing tool to do this. The tool consists of a series of pins and a handle. Insert the pins into the retaining rings and gently pry them loose. Be careful not to apply too much pressure, as you don’t want to damage the rings or the bolt.

Step 4: Remove the Pins

Once the retaining rings are removed, you can remove the pins that hold the bolt in place. These pins are usually located at the rear of the bolt and are held in place by a retaining ring. Use the bolt-removing tool to remove the pins and gently lift the bolt out of the receiver.

Step 5: Remove the Bolt

Once the pins are removed, you can lift the bolt out of the receiver. Be careful not to touch any of the internal mechanisms or the firing pin, as this can cause damage to the rifle.

Important Tips and Precautions

• Always ensure the rifle is unloaded and the action is open before attempting to remove the bolt.
• Use a bolt-removing tool to avoid damaging the retaining rings or the bolt.
• Be careful not to touch any of the internal mechanisms or the firing pin, as this can cause damage to the rifle.
• If you’re not comfortable removing the bolt yourself, consider taking it to a professional gunsmith.
• Always follow proper safety procedures when handling firearms.

Table: Bolt-Removing Tool Specifications

Conclusion

Removing the bolt on a Remington 700 is a relatively straightforward process, but it does require some care and attention to detail. By following the steps outlined in this article and using the right tools, you can remove the bolt safely and efficiently. Remember to always follow proper safety procedures and handle the rifle with care.