How to cerakote gun parts?

How to Cerakote Gun Parts: A Step-by-Step Guide

Cerakote is a popular firearm coating that provides a durable, non-reflective, and corrosion-resistant finish for gun parts. The process of applying Cerakote to gun parts requires some expertise and attention to detail, but with the right guidance, anyone can achieve professional-looking results. In this article, we’ll take you through a step-by-step guide on how to cerakote gun parts.

What is Cerakote?

Before we dive into the process, it’s essential to understand what Cerakote is and its benefits. Cerakote is a ceramic-based coating that is designed to provide a durable and non-reflective finish for firearms and other metal parts. It is a popular choice among gun enthusiasts and professionals alike due to its:

• Durability: Cerakote is highly resistant to wear and tear, making it an excellent choice for gun parts that are prone to heavy use.
• Corrosion resistance: Cerakote is resistant to corrosion, which means it can withstand exposure to saltwater, humidity, and other corrosive environments.
• Non-reflective: Cerakote has a matte finish, which makes it ideal for tactical and hunting applications where stealth is essential.
• Aesthetics: Cerakote comes in a wide range of colors and can be used to create custom designs and patterns.

Preparation is Key

Before you start the cerakote process, it’s crucial to prepare your gun parts properly. Here are some essential steps to follow:

• Cleanliness: Make sure your gun parts are free of dirt, grime, and oil. Use a degreaser and a soft brush to clean the parts.
• Deburring: Use a deburring tool to remove any sharp edges or burrs from the parts.
• Rust removal: If your gun parts have rust or corrosion, use a rust remover to clean them.
• Media blasting: Use a media blaster to remove any residue or debris from the parts.

Applying Cerakote

Now that your gun parts are prepared, it’s time to apply the Cerakote. Here’s a step-by-step guide:

• Primer: Apply a thin layer of Cerakote primer to the parts using a soft cloth or a brush. Make sure to cover the entire surface.
• Cerakote: Apply a thin layer of Cerakote to the parts using a soft cloth or a brush. Make sure to cover the entire surface.
• Curing: Allow the Cerakote to cure for the recommended amount of time (usually 24 hours).
• Topcoat: Apply a thin layer of Cerakote topcoat to the parts using a soft cloth or a brush. This will provide an additional layer of protection and durability.

Tips and Tricks

Here are some additional tips and tricks to keep in mind when cerakoting gun parts:

• Thinning: Make sure to thin your Cerakote with the recommended thinner to achieve a smooth, even finish.
• Applying pressure: Apply even pressure when applying the Cerakote to ensure a smooth, even finish.
• Avoiding runs: Avoid applying too much Cerakote at once, as this can cause runs and unevenness.
• Cleaning: Use a soft cloth and mild soap to clean your gun parts after cerakoting.

Common Mistakes to Avoid

Here are some common mistakes to avoid when cerakoting gun parts:

• Inadequate preparation: Failing to properly clean and prepare your gun parts can lead to poor adhesion and uneven finish.
• Incorrect application: Applying too much Cerakote or applying it incorrectly can cause runs and unevenness.
• Insufficient curing: Failing to allow the Cerakote to cure for the recommended amount of time can lead to poor durability and adhesion.

Conclusion

Cerakoting gun parts requires some expertise and attention to detail, but with the right guidance, anyone can achieve professional-looking results. By following the steps outlined in this article, you can create a durable, non-reflective, and corrosion-resistant finish for your gun parts. Remember to always follow the manufacturer’s instructions and take your time to ensure a smooth, even finish.

Table: Cerakote Application

Table: Common Mistakes to Avoid

I hope this article has been helpful in guiding you through the process of cerakoting gun parts. Remember to always follow the manufacturer’s instructions and take your time to ensure a smooth, even finish. Happy cerakoting!