How to draw a easy helicopter?

How to Draw a Easy Helicopter?

Drawing a helicopter can be a fun and creative activity for both kids and adults. With a few simple steps and some basic drawing skills, you can create a realistic and easy-to-draw helicopter. In this article, we will guide you through the process of drawing a easy helicopter, and provide you with some helpful tips and tricks to get you started.

Gather Your Drawing Tools

Before you start drawing your helicopter, make sure you have the following drawing tools:

• Paper (preferably with a grid pattern)
• Pencils (#2 and 4B)
• Eraser
• Markers or colored pencils (optional)

Step 1: Sketch the Basic Shape

Helicopter Body

To draw the basic shape of the helicopter, start by sketching a large rectangle with rounded corners. Make sure the rectangle is taller than it is wide. This will be the main body of the helicopter.

• Note: The ratio of the rectangle should be approximately 2:3 (tall:wide).

Step 2: Add the Rotor Blades

Rotor Blades

The rotor blades are the long, curved arms that rotate around the body of the helicopter. Draw two long, curved lines that start from the top of the body and extend downwards. Make sure the curves are smooth and consistent.

• Tip: Use a gentle, smooth motion to draw the curved lines, and make sure they are symmetrical on both sides of the body.

Step 3: Add the Tail

Tail

The tail is the vertical fin at the back of the helicopter. Draw a small triangle with rounded edges, making sure it is centered at the back of the body.

• Note: The tail should be slightly pointed, and the edges should be rounded to give it a smooth appearance.

Step 4: Add the Landing Gear

Landing Gear

The landing gear is the struts and wheels that allow the helicopter to take off and land safely. Draw two long, thin lines that extend from the body to the ground, forming a V-shape. Add small circles at the end of each line to represent the wheels.

• Tip: Make sure the landing gear is proportionate to the size of the body, and that the wheels are small enough to be hidden by the body when the helicopter is in flight.

Step 5: Add the Cockpit and Windows

Cockpit and Windows

The cockpit is the enclosed area at the front of the helicopter where the pilot sits. Draw a small rectangle with a flat top and rounded edges, making sure it is centered at the front of the body. Add two small windows on either side of the cockpit, making sure they are symmetrical.

• Note: The cockpit should be relatively small compared to the body of the helicopter, and the windows should be small enough to be barely visible.

Step 6: Add the Final Details

Final Details

• Add a propeller: Draw a small, circular propeller at the front of the helicopter, making sure it is centered and symmetrical.
• Add a tail light: Draw a small, circular light at the back of the tail, making sure it is centered and symmetrical.
• Add some shading: Use your pencils to add some basic shading to your helicopter, making sure to follow the contours of the body and rotor blades.

Tips and Tricks

• Use reference images: Take a look at pictures of real helicopters to get an idea of their shape, proportions, and details. This will help you to draw a more accurate and realistic helicopter.
• Keep it simple: Don’t worry too much about details – focus on getting the basic shape and proportions right. You can always add more details later.
• Practice makes perfect: Don’t be discouraged if your first attempts don’t turn out as expected. Keep practicing, and you’ll get better and better!

Conclusion

Drawing a easy helicopter may seem like a daunting task, but with these simple steps and tips, you can create a realistic and easy-to-draw helicopter. Remember to keep it simple, use reference images, and practice makes perfect. With a little bit of patience and creativity, you can create a stunning helicopter drawing that you’ll be proud to show off!

Table: Measurement Guide

Bullets List: Drawing Tips

• Use reference images to get an idea of the shape, proportions, and details of real helicopters
• Keep it simple and focus on getting the basic shape and proportions right
• Practice makes perfect – don’t be discouraged if your first attempts don’t turn out as expected
• Use different pencils and shading techniques to add depth and dimension to your drawing
• Add details gradually, starting with the most important features first