How to draw AK 47 gun?

How to Draw AK-47 Gun? A Step-by-Step Guide

The AK-47, designed by Mikhail Kalashnikov in 1947, is one of the most widely used and recognizable assault rifles in the world. With its unique design and rugged simplicity, the AK-47 has become an iconic symbol of military power and engineering innovation. Drawing an AK-47 gun requires a good understanding of its physical components and proportions. Here is a step-by-step guide to help you get started:

Understanding the Anatomy of an AK-47

Before you start drawing the AK-47, it’s essential to understand its physical components and proportions. Study the rifle’s anatomy to familiarize yourself with the various parts, such as:

• Magazine: The magazine is typically curved and located below the receiver.
• Receiver: The receiver is the main body of the rifle, housing the majority of the internal components.
• Handguard: The handguard is a plastic or metal tube that provides a grip for the operator’s hand.
• Muzzle: The muzzle is the end of the rifle, where the barrel protrudes.
• Buttstock: The buttstock is the section at the rear of the rifle that provides a place to hold the rifle.
• Trigger: The trigger is the mechanism that, when pulled, allows the rifle to fire.
• Sight: The sight is the system that helps the operator aim the rifle.

Drawing the AK-47 Gun: Step-by-Step Instructions

Here’s a step-by-step guide to help you draw an AK-47 gun:

Step 1: Draw the Overall Shape

Important Point: The AK-47 has a characteristic banana-shaped receiver. Focus on getting the overall shape of the receiver correct before proceeding.

• Start by drawing a long, curved rectangle with a slightly curved upper edge. The length should be about 5-6 times the height of the rectangle.
• Pay attention to the shape and proportions of the rectangle. The AK-47 receiver is typically more rounded than other assault rifles.

Step 2: Add the Handguard

Tip: The handguard should be slightly thinner and longer than the receiver. Adjust your drawing accordingly.

• Draw a tube-shaped structure around the receiver, approximately 1-2 times the width of the receiver. The handguard should be slightly curved and tapers towards the buttstock.
• Make sure to keep the handguard close to the receiver to avoid a gap.

Step 3: Draw the Buttstock

Note: The buttstock should be slightly curved and about half the length of the receiver.

• Draw a slightly curved rectangle at the rear of the rifle, making sure it’s attached to the receiver.
• Adjust the shape and length to ensure it’s symmetrical with the receiver.

Step 4: Add the Trigger and Safety Lever

Important: Pay attention to the detail on the trigger and safety lever.

• Draw a trigger located near the handguard, about 1/3 of the way from the front of the rifle. The trigger should be small and rounded.
• Add a safety lever (if present) to the top of the trigger.

Step 5: Add the Sight

Note: The AK-47 sight is usually fixed, but some variations may have an adjustable scope or sights.

• Draw a fixed sight located at the end of the receiver, slightly above the center line.
• Adjust the size and shape to suit the rifle’s proportions.

Step 6: Draw the Magazine

Important: The magazine is crucial in maintaining the proportions of the AK-47. Get it right for an accurate drawing.

• Draw a curved magazine that sits below the receiver. Make sure it’s centered and not too large.
• The magazine should have a rounded top and tapered bottom, with a few notable curves and crevices.

Step 7: Add the Barrel

Tip: Pay attention to the proportions and orientation of the barrel.

• Draw a long, tapered tube protruding from the front of the rifle (the muzzle). Adjust its length and shape according to the rifle’s design.
• Make sure the barrel is centered and follows the curved shape of the handguard.

Step 8: Add Finishing Touches

• Adjust and refine your drawing based on the proportions and features you’ve added so far.
• Pay attention to details such as grip and surface texture, although they might not be crucial in creating a recognizable AK-47.
• Consider adding accessories such as a bipod or sling to give your drawing more depth and detail.

Tips for Better Drawing

• Practice and study the AK-47 from various angles. Research reference images to get the proportions and details correct.
• Focus on the relationships between the different components of the rifle. Pay attention to the curves, creases, and shapes that help maintain the rifle’s distinctive profile.
• Don’t hesitate to experiment and adjust your drawing as needed. Patience and attention to detail will yield a more realistic AK-47 drawing.

In conclusion, drawing an AK-47 gun requires patience, attention to detail, and a good understanding of the rifle’s physical components and proportions. Follow the step-by-step guide outlined above, and you’ll be well on your way to creating a recognizable and detailed drawing of the AK-47.