How to Make a Pen Gun: A Step-by-Step Guide
Introduction
A pen gun, also known as a ballpoint gun or a lipstick gun, is a unique and intriguing device that combines the functionality of a pen with the power of a firearm. While it may seem like a novelty item, a pen gun can be a valuable tool for self-defense or as a collectible item. In this article, we will guide you through the process of making a pen gun, highlighting the essential steps and components required.
Materials Needed
Before we begin, it’s essential to gather the necessary materials. Here’s a list of what you’ll need:
- Pen casing: You can use an old pen or purchase a new one specifically designed for this project.
- Ballpoint pen refill: This will serve as the foundation for your pen gun’s firing mechanism.
- Small caliber ammunition: You can use.22 LR or.25 ACP ammunition, depending on the size of your pen.
- Metal components: You’ll need small metal parts such as a firing pin, trigger mechanism, and a barrel.
- Glue and epoxy: For assembling and bonding the components.
- Sandpaper and paint: For smoothing and decorating the pen gun.
Step 1: Disassemble the Pen
Begin by disassembling the pen casing. You’ll need to remove the ink cartridge and any other internal components. Be careful not to damage the casing, as it will serve as the foundation for your pen gun.
Step 2: Prepare the Ballpoint Pen Refill
Take the ballpoint pen refill and remove the ink cartridge. You’ll need to modify the refill to create a firing mechanism. You can do this by drilling a small hole in the center of the refill and attaching a metal pin or spring-loaded mechanism.
Step 3: Attach the Firing Mechanism
Attach the modified ballpoint pen refill to the pen casing. Make sure it’s securely attached, as this will affect the overall functionality of your pen gun.
Step 4: Add the Metal Components
Attach the metal components, such as the firing pin, trigger mechanism, and barrel, to the pen casing. Make sure they’re properly aligned and secured to ensure proper function.
Step 5: Assemble the Pen Gun
Assemble all the components together, making sure they’re securely attached and properly aligned. Use glue and epoxy to bond the components, and sand any rough edges.
Step 6: Add a Trigger Mechanism
Create a trigger mechanism by attaching a small metal or plastic piece to the pen casing. This will allow you to fire the pen gun. You can use a spring-loaded mechanism or a simple lever system.
Step 7: Add a Barrel
Attach a small metal or plastic barrel to the pen casing. This will serve as the firing mechanism’s guide. Make sure it’s securely attached and properly aligned.
Step 8: Final Assembly and Decoration
Once all the components are assembled, sand and paint the pen gun to give it a smooth finish. You can also add any additional decorations, such as engravings or a trigger guard.
Safety Precautions
When handling a pen gun, always exercise extreme caution. Pen guns are designed for self-defense, but they can still cause harm if not used properly. Make sure to follow all local laws and regulations, and always handle the pen gun with care.
Table: Pen Gun Specifications
| Component | Description | Measurement |
|---|---|---|
| Pen casing | Used as the foundation for the pen gun | 5-7 inches (13-18 cm) |
| Ballpoint pen refill | Modified to create a firing mechanism | 1-2 inches (2.5-5 cm) |
| Metal components | Firing pin, trigger mechanism, and barrel | Various |
| Glue and epoxy | Used for assembling and bonding components | N/A |
| Sandpaper and paint | Used for smoothing and decorating the pen gun | N/A |
Conclusion
Making a pen gun requires patience, skill, and attention to detail. By following these steps and using the right materials, you can create a unique and functional pen gun. Remember to always exercise caution and follow local laws and regulations when handling a pen gun. With the right guidance and practice, you can create a pen gun that’s both functional and collectible.
