How to Reload Shotgun Lethal Company: A Step-by-Step Guide
As a shooter, reloading your shotgun efficiently and effectively is crucial for success in various scenarios, including hunting, self-defense, and competitive shooting. Lethal Company, a well-known manufacturer of shotgun shells, offers a range of products designed to meet the needs of different shooters. In this article, we will provide a step-by-step guide on how to reload shotgun Lethal Company shells, covering the necessary tools, techniques, and tips for optimal performance.
Gathering the Necessary Tools and Equipment
Before you start reloading, make sure you have the following tools and equipment:
- Lethal Company shotgun shells: Choose the desired caliber, gauge, and load type (e.g., buckshot, slug, or birdshot).
- Reloading bench or table: A stable surface for loading and handling your shotgun shells.
- Shell crimp die: A tool used to crimp the shell to the wad and seal the cartridge.
- Wad punch: A tool used to seat the wad in the shell.
- Powder measure: A device used to measure the correct amount of powder for each load.
- Powder bushing: A tool used to seat the powder charge in the shell.
- Crimp die bushing: A tool used to crimp the shell to the wad and seal the cartridge.
- Shell holder: A tool used to hold the shell in place during the loading process.
- Calipers: A tool used to measure the internal diameter of the shell.
Step-by-Step Guide to Reloading Lethal Company Shotgun Shells
Step 1: Prepare the Reloading Area
Before starting the reloading process, ensure your reloading area is clean, well-lit, and free from distractions. Organize your tools and equipment in a way that makes them easily accessible.
Step 2: Measure the Powder Charge
Use your powder measure to measure the correct amount of powder for each load. Lethal Company recommends the following powder charges for their shotgun shells:
| Gauge | Powder Charge (grains) |
|---|---|
| 12-gauge | 25-30 |
| 16-gauge | 20-25 |
| 20-gauge | 15-20 |
| 28-gauge | 10-15 |
Step 3: Load the Shell with Powder
Use your powder bushing to seat the powder charge in the shell. Fill the shell with the measured powder charge, making sure to leave enough room at the top for the wad.
Step 4: Add the Wad
Use your wad punch to seat the wad in the shell. Lethal Company recommends using their proprietary wads for optimal performance.
Step 5: Crimp the Shell
Use your shell crimp die to crimp the shell to the wad and seal the cartridge. Adjust the crimp die to ensure a consistent crimp.
Step 6: Check the Cartridge
Use your calipers to measure the internal diameter of the shell. Check the cartridge to ensure it meets the specifications outlined by Lethal Company.
Tips and Tricks for Reloading Lethal Company Shotgun Shells
- Use a consistent loading technique to ensure consistent results.
- Keep your reloading area clean and organized to reduce errors and improve efficiency.
- Use the correct powder charge for each load to ensure optimal performance.
- Use Lethal Company**’s proprietary wads for optimal performance.
- Adjust the crimp die to ensure a consistent crimp.
- Check the cartridge regularly to ensure it meets the specifications outlined by Lethal Company.
Conclusion
Reloading your shotgun with Lethal Company shells requires attention to detail, patience, and practice. By following the step-by-step guide outlined in this article, you can ensure consistent and accurate results. Remember to use the correct powder charge, use Lethal Company‘s proprietary wads, and adjust the crimp die to ensure optimal performance. With practice and patience, you’ll be reloading like a pro in no time.
