How to reset honeywell water heater pilot light?

How to Reset Honeywell Water Heater Pilot Light: A Step-by-Step Guide

Resetting the pilot light on your Honeywell water heater is a relatively simple process that can be completed with a few basic tools and some patience. However, it’s essential to follow the correct procedure to ensure your safety and avoid any potential damage to the appliance.

Why Does the Pilot Light Go Out?

Before we dive into the reset process, it’s essential to understand why the pilot light may go out in the first place. Common reasons include:

• Incorrect pilot light adjustment: If the pilot light is not adjusted correctly, it may not stay lit.
• Low gas pressure: Insufficient gas pressure can cause the pilot light to go out.
• Clogged or dirty burner: A clogged or dirty burner can prevent the pilot light from staying lit.
• Faulty thermocouple: A faulty thermocouple can prevent the pilot light from staying lit.

How to Reset Honeywell Water Heater Pilot Light

Resetting the pilot light on your Honeywell water heater involves several steps. Follow this step-by-step guide to ensure a successful reset:

Step 1: Turn Off the Gas Supply

Before attempting to reset the pilot light, turn off the gas supply to the water heater. You can do this by locating the gas shut-off valve and turning it clockwise until it stops. This will ensure your safety and prevent any accidental gas leaks.

Step 2: Remove the Access Panel

Remove the access panel on the front of the water heater to access the pilot light assembly. You may need to remove screws or clips to do so.

Step 3: Locate the Pilot Light Assembly

Once you have access to the pilot light assembly, locate the pilot light itself. It’s usually a small flame that ignites the burner.

Step 4: Remove the Pilot Light Cap

Remove the pilot light cap by turning it counterclockwise. This will allow you to access the pilot light assembly.

Step 5: Clean the Pilot Light Assembly

Use a soft brush or cloth to clean the pilot light assembly, including the pilot light orifice and the surrounding area. This will help ensure a clean and safe reset.

Step 6: Check the Pilot Light Orifice

Check the pilot light orifice for any blockages or debris. If you find any, clean it out with a soft brush or cloth.

Step 7: Replace the Pilot Light Cap

Replace the pilot light cap by turning it clockwise until it stops.

Step 8: Turn On the Gas Supply

Turn on the gas supply to the water heater by locating the gas shut-off valve and turning it counterclockwise until it stops.

Step 9: Light the Pilot Light

Use a long match or lighter to light the pilot light. Hold the flame to the pilot light orifice until the pilot light ignites.

Step 10: Adjust the Pilot Light

Adjust the pilot light to the recommended setting, usually marked on the side of the water heater.

Tips and Tricks

• Use a soft brush or cloth: When cleaning the pilot light assembly, use a soft brush or cloth to avoid damaging any components.
• Check for blockages: Regularly check the pilot light orifice for blockages or debris to ensure a safe and efficient reset.
• Follow the manufacturer’s instructions: Always follow the manufacturer’s instructions for resetting the pilot light on your specific Honeywell water heater model.

Common Issues and Troubleshooting

• Pilot light won’t stay lit: Check the pilot light orifice for blockages or debris. Clean it out with a soft brush or cloth if necessary.
• Pilot light is too low: Adjust the pilot light to the recommended setting, usually marked on the side of the water heater.
• Pilot light is too high: Adjust the pilot light to the recommended setting, usually marked on the side of the water heater.

Conclusion

Resetting the pilot light on your Honeywell water heater is a relatively simple process that can be completed with a few basic tools and some patience. By following the step-by-step guide outlined above, you can ensure a safe and efficient reset. Remember to always follow the manufacturer’s instructions for your specific water heater model and to troubleshoot any common issues that may arise.