How to Take a Remington 870 Apart?
The Remington 870 is a classic pump-action shotgun that has been a favorite among hunters and shooters for decades. With its rugged design and reliable performance, it’s no wonder why many people want to customize or maintain their Remington 870. However, taking apart the Remington 870 can be a daunting task for those who are new to firearms maintenance. In this article, we’ll guide you through the process of disassembling the Remington 870, step by step.
Before You Start
Before you begin, make sure you have the following:
- A Remington 870 shotgun
- A cleaning kit or a set of Allen wrenches
- A flat surface to work on
- A pair of safety glasses and gloves (optional)
Step 1: Remove the Stock
To start, you’ll need to remove the stock from the shotgun. To do this, locate the stock screw, which is usually located at the rear of the stock. Use an Allen wrench to loosen the screw. Once the screw is loose, you should be able to lift the stock off the shotgun.
Step 2: Remove the Trigger Group
Next, you’ll need to remove the trigger group from the shotgun. To do this, locate the trigger group screw, which is usually located on the underside of the shotgun. Use an Allen wrench to loosen the screw. Once the screw is loose, you should be able to lift the trigger group out of the shotgun.
Step 3: Remove the Pump Assembly
Now it’s time to remove the pump assembly from the shotgun. To do this, locate the pump screw, which is usually located on the top of the pump. Use an Allen wrench to loosen the screw. Once the screw is loose, you should be able to lift the pump assembly out of the shotgun.
Step 4: Remove the Barrel
To remove the barrel from the shotgun, you’ll need to loosen the barrel nut. Use a barrel nut wrench to loosen the nut. Once the nut is loose, you should be able to lift the barrel out of the shotgun.
Step 5: Remove the Forend
The forend is the wooden or synthetic tube that surrounds the barrel of the shotgun. To remove it, you’ll need to loosen the forend screw, which is usually located at the rear of the forend. Use an Allen wrench to loosen the screw. Once the screw is loose, you should be able to lift the forend off the shotgun.
Step 6: Remove the Trigger
The trigger is the part of the shotgun that you pull to fire it. To remove it, you’ll need to loosen the trigger screw, which is usually located on the underside of the trigger group. Use an Allen wrench to loosen the screw. Once the screw is loose, you should be able to lift the trigger out of the trigger group.
Step 7: Remove the Hammer
The hammer is the part of the shotgun that strikes the firing pin to ignite the cartridge. To remove it, you’ll need to loosen the hammer screw, which is usually located on the underside of the trigger group. Use an Allen wrench to loosen the screw. Once the screw is loose, you should be able to lift the hammer out of the trigger group.
Step 8: Remove the Firing Pin
The firing pin is the part of the shotgun that strikes the primer of the cartridge to ignite it. To remove it, you’ll need to loosen the firing pin screw, which is usually located on the underside of the trigger group. Use an Allen wrench to loosen the screw. Once the screw is loose, you should be able to lift the firing pin out of the trigger group.
Step 9: Reassemble the Shotgun
Now that you’ve disassembled the shotgun, it’s time to reassemble it. Make sure to follow the same steps in reverse order, making sure that each part is properly secured before moving on to the next one.
Tips and Tricks
Here are a few tips and tricks to keep in mind when disassembling and reassembling your Remington 870:
- Make sure to clean each part thoroughly before reassembling the shotgun.
- Use a soft cloth to wipe down each part to remove any dirt or debris.
- Apply a small amount of oil to each part to keep it lubricated.
- Make sure to tighten each screw in the correct order to avoid damaging any parts.
- If you’re not comfortable disassembling and reassembling your shotgun, consider taking it to a professional gunsmith.
Conclusion
Disassembling and reassembling your Remington 870 shotgun can seem intimidating at first, but with the right tools and a little patience, it’s a relatively simple process. By following the steps outlined in this article, you should be able to disassemble and reassemble your shotgun with ease. Remember to always follow proper safety procedures and to handle each part with care to avoid damaging any parts.
