How to take apart Remington 870?

How to Take Apart a Remington 870: A Step-by-Step Guide

The Remington 870 is a classic pump-action shotgun that has been a favorite among hunters and shooters for decades. While it’s a reliable and durable firearm, there may come a time when you need to take it apart for cleaning, maintenance, or repair. In this article, we’ll guide you through the process of disassembling a Remington 870, highlighting the key steps and components to keep in mind.

Before You Start

Before you begin, make sure you have the necessary tools and follow all safety precautions:

• Tools needed:

  • Chamber flag or plug
  • Safety glasses
  • Gun cleaning kit
  • Wrench (for magazine cap)
  • Pliers (for ejector rod)

• Safety precautions:

  • Always handle the firearm with unloaded chambers and no shells in the magazine.
  • Keep your fingers away from the trigger and make sure the safety is engaged.
  • Wear eye protection to prevent accidental discharge.

Step 1: Remove the Magazine Cap

To start, remove the magazine cap by unscrewing it with a wrench. This will allow you to access the magazine and begin the disassembly process.

Step 2: Remove the Magazine

With the magazine cap removed, pull the magazine out of the receiver. The magazine is held in place by a spring-loaded clip, so be careful not to lose it.

Step 3: Remove the Ejector Rod

Next, remove the ejector rod by sliding it out of the receiver. You may need to use pliers to grasp the rod and pull it out.

Step 4: Remove the Pump Fore-end

The pump fore-end is the tube that houses the pump mechanism. To remove it, simply slide it off the receiver.

Step 5: Remove the Pump Mechanism

With the pump fore-end removed, you can access the pump mechanism. Remove the pump rod by sliding it out of the receiver.

Step 6: Remove the Bolt

The bolt is the moving part that cycles the action. To remove it, pull it back and lift it out of the receiver.

Step 7: Remove the Receiver

The receiver is the main body of the firearm. To remove it, you’ll need to disengage the receiver latch and slide it off the frame.

Step 8: Remove the Trigger Group

The trigger group consists of the trigger, sear, and safety. To remove it, pull the trigger and slide the group out of the receiver.

Step 9: Remove the Barrels

The barrels are attached to the receiver and can be removed by sliding them off.

Step 10: Reassemble the Remington 870

Once you’ve completed the disassembly process, you can begin reassembling the firearm. Make sure to follow the same steps in reverse order, ensuring that all parts are properly seated and secured.

Tips and Tricks

• Keep track of parts: It’s easy to lose small parts during the disassembly process. Make sure to keep track of each component and store them in a safe place.
• Use a gun cleaning kit: A gun cleaning kit can help you clean and lubricate each component as you reassemble the firearm.
• Be patient: Disassembling a Remington 870 can be a time-consuming process. Take your time and be patient to ensure that each component is properly removed and reassembled.

Conclusion

Taking apart a Remington 870 may seem like a daunting task, but with the right tools and knowledge, it’s a manageable process. By following the steps outlined in this article, you’ll be able to disassemble and reassemble your firearm with confidence. Remember to always follow safety precautions and take your time to ensure that each component is properly removed and reassembled.

Table: Remington 870 Disassembly Steps

Bullets List: Remington 870 Disassembly Tips

• Keep track of parts and store them in a safe place
• Use a gun cleaning kit to clean and lubricate components
• Be patient and take your time to ensure proper removal and reassembly of components
• Always follow safety precautions when handling firearms
• Consult a gunsmith or professional if you’re unsure about any part of the disassembly process