How to adjust an old Remington 700 Trigger?

Adjusting an Old Remington 700 Trigger: A Step-by-Step Guide

The Remington 700 is a legendary rifle known for its accuracy and reliability. However, as with any mechanical device, the trigger can become worn out over time, requiring adjustments to maintain optimal performance. In this article, we will guide you through the process of adjusting an old Remington 700 trigger.

Understanding the Remington 700 Trigger

Before we dive into the adjustment process, it’s essential to understand the basics of the Remington 700 trigger. The trigger is a two-stage design, meaning it requires a deliberate press to initially engage the sear, and then a second stage to release the sear and fire the rifle.

The trigger has two primary components:

• First Stage: The first stage is the initial take-up of the trigger, which is designed to be light and smooth.
• Second Stage: The second stage is the point at which the trigger sear is released, and the rifle fires.

Tools and Materials Needed

To adjust the Remington 700 trigger, you will need the following tools and materials:

• Trigger adjustment tool: A specialized tool designed specifically for adjusting Remington 700 triggers.
• Allen wrench: A 1/8" or 3/16" Allen wrench is required to adjust the trigger’s tension screw.
• Trigger spring: Some triggers may require replacement of the trigger spring, which can be obtained from Remington or a reputable parts supplier.
• Pliers: Pliers can be used to adjust the trigger’s overtravel adjustment.

Step-by-Step Adjustment Process

Adjusting the Remington 700 trigger is a relatively simple process that can be completed in a few steps.

Step 1: Remove the Trigger Group

To access the trigger adjustment, you need to remove the trigger group from the rifle. This involves the following steps:

• Remove the magazine and any remaining ammunition.
• Pull back the bolt and remove it from the rifle.
• Remove the stock and the trigger housing.
• Pull the trigger group out of the rifle.

Step 2: Locate the Trigger Adjustment Screws

Once the trigger group is removed, you need to locate the trigger adjustment screws. The Remington 700 trigger has two adjustment screws:

• First Stage Adjustment Screw: Located on the right side of the trigger housing, this screw adjusts the first stage take-up.
• Second Stage Adjustment Screw: Located on the left side of the trigger housing, this screw adjusts the second stage sear release.

Step 3: Adjust the First Stage

The first stage adjustment screw is used to adjust the trigger’s initial take-up. To adjust this screw, follow these steps:

• Loosen the first stage adjustment screw using the Allen wrench.
• Use the trigger adjustment tool to carefully adjust the trigger’s first stage take-up. Rotate the tool clockwise to increase the take-up or counterclockwise to decrease the take-up.
• Once the desired take-up is achieved, tighten the first stage adjustment screw in place.

Step 4: Adjust the Second Stage

The second stage adjustment screw is used to adjust the trigger’s sear release. To adjust this screw, follow these steps:

• Loosen the second stage adjustment screw using the Allen wrench.
• Use the trigger adjustment tool to carefully adjust the trigger’s second stage sear release. Rotate the tool clockwise to increase the sear release or counterclockwise to decrease the sear release.
• Once the desired sear release is achieved, tighten the second stage adjustment screw in place.

Step 5: Check the Trigger Overtravel

The trigger overtravel is the distance the trigger moves after the sear has been released. To adjust the trigger overtravel, follow these steps:

• Loosen the trigger’s overtravel adjustment screw using the pliers.
• Use the trigger adjustment tool to carefully adjust the trigger’s overtravel. Rotate the tool clockwise to decrease the overtravel or counterclockwise to increase the overtravel.
• Once the desired overtravel is achieved, tighten the overtravel adjustment screw in place.

Step 6: Reassemble the Trigger Group

Once the trigger adjustments are complete, reassemble the trigger group in the reverse order that it was disassembled.

Conclusion

Adjusting the Remington 700 trigger is a relatively simple process that can be completed with the right tools and a little patience. By following the steps outlined in this article, you should be able to achieve a smooth and consistent trigger pull that will improve the accuracy and reliability of your rifle. Remember to always follow proper safety procedures when working on your rifle, and never attempt to adjust the trigger without proper knowledge and training.

Table: Trigger Adjustment Screws

Important Notes:

• Always follow proper safety procedures when working on your rifle.
• Never attempt to adjust the trigger without proper knowledge and training.
• Make sure to keep the trigger adjustment tool and Allen wrench in a safe location to avoid accidents.
• If you are unsure about any part of the adjustment process, it is recommended to consult a professional gunsmith.