Home » Blog » How to break down Glock 19x?

How to break down Glock 19x?

How to Break Down Glock 19x: A Comprehensive Guide

The Glock 19x is a highly versatile and popular handgun that requires regular maintenance to ensure its optimal performance. Breaking down the Glock 19x is a crucial part of this maintenance process, and in this article, we will guide you through each step.

Why Break Down Your Glock 19x?

Bulk Ammo for Sale at Lucky Gunner

Before we dive into the process of breaking down your Glock 19x, it’s essential to understand why you should do so. Breaking down your gun allows you to:

  • Inspect the internal components for any signs of wear or damage
  • Clean and lubricate the various parts to prevent corrosion and ensure smooth operation
  • Perform routine maintenance tasks such as replacing springs or extracting pins
  • Store your gun safely and securely when not in use

Step 1: Remove the Magazines

The first step in breaking down your Glock 19x is to remove the magazines. Make sure to pull back the slide and lift the magazine release lever with your thumb to eject the magazine.

Step 1: Remove the Magazines
Pull back the slide
Lift the magazine release lever with your thumb to eject the magazine

Step 2: Remove the Slide

Next, pull the slide back until it locks into position. Then, slightly tilt the slide to the right and pull it out of the frame.

Step 2: Remove the Slide
Pull the slide back until it locks into position
Slightly tilt the slide to the right and pull it out of the frame

Step 3: Remove the Recoil Spring and Guide Rod

With the slide removed, you’ll now need to remove the recoil spring and guide rod. To do this, pull out the guide rod from the recoil spring assembly.

Step 3: Remove the Recoil Spring and Guide Rod
Pull out the guide rod from the recoil spring assembly

Step 4: Remove the Barrel Link and Trigger Assembly

The next step is to remove the barrel link and trigger assembly. To do this, push the barrel link away from the frame while lifting the trigger assembly.

Step 4: Remove the Barrel Link and Trigger Assembly
Push the barrel link away from the frame
Lift the trigger assembly

Step 5: Remove the Trigger Springs

With the trigger assembly removed, you’ll need to remove the trigger springs. To do this, pull the springs out of the trigger.

Step 5: Remove the Trigger Springs
Pull the springs out of the trigger

Step 6: Remove the Trigger Pad

The next step is to remove the trigger pad. To do this, push the trigger pad away from the frame.

Step 6: Remove the Trigger Pad
Push the trigger pad away from the frame

Step 7: Remove the Recoil Spring Assembly

With the trigger pad removed, you’ll need to remove the recoil spring assembly. To do this, pull out the recoil spring assembly from the slide.

Step 7: Remove the Recoil Spring Assembly
Pull out the recoil spring assembly from the slide

Step 8: Inspect and Clean the Internal Components

Once all the internal components have been removed, inspect each part for any signs of wear or damage. Then, clean and lubricate each part to prevent corrosion and ensure smooth operation.

Step 8: Inspect and Clean the Internal Components
Inspect each part for signs of wear or damage
Clean and lubricate each part

Reassembling the Glock 19x

Reassembling the Glock 19x is the reverse process of disassembling it. Make sure to follow these steps carefully:

  1. Insert the recoil spring assembly into the slide.
  2. Insert the trigger pad into the frame.
  3. Replace the trigger springs.
  4. Replace the barrel link and trigger assembly.
  5. Replace the recoil spring and guide rod.
  6. Replace the slide.
  7. Replace the magazines.

By following these steps, you’ll be able to break down your Glock 19x and perform regular maintenance tasks to ensure its optimal performance. Remember to always handle your gun with care and follow proper safety procedures when cleaning and reassembling your Glock 19x.

Enhance Your Knowledge with Curated Videos on Guns and Accessories


Leave a Comment