How to clean a Remington 1100?

How to Clean a Remington 1100? A Step-by-Step Guide

The Remington 1100 is a semi-automatic shotgun known for its reliability and durability. To maintain its performance and longevity, regular cleaning is essential. Cleaning your Remington 1100 can be a bit daunting, but with this step-by-step guide, you’ll be able to keep your shotgun in top condition.

Why Clean Your Remington 1100?

Before we dive into the cleaning process, let’s discuss the importance of cleaning your Remington 1100.

• Prevents corrosion: When dirt, dust, and moisture accumulate on your shotgun, they can cause corrosion, which can lead to rust and damage.
• Maintains performance: A clean shotgun is a reliable shotgun. Regular cleaning ensures that your Remington 1100 operates smoothly and accurately.
• Extends lifespan: Regular cleaning helps to extend the lifespan of your shotgun by preventing damage and wear caused by dirt and grime.

Gathering Materials

Before you start cleaning your Remington 1100, make sure you have the following materials:

• Cleaning rod and brush: A cleaning rod and brush are specifically designed for cleaning shotguns and are available at most hunting supply stores.
• Gun cleaning solvent: You’ll need a cleaning solvent that’s safe for your shotgun’s finish and not harsh on the gun. Remington 1100-specific cleaning solutions are recommended.
• Cloths and patches: You’ll need clean cloths and patches to wipe down and clean your shotgun.
• Wipe-down lubricant: Silicone-based lubricant is recommended.
• Muzzle brush: A muzzle brush is designed to clean the bore of your shotgun.

Cleaning the Remington 1100

Now that you have your materials, it’s time to start cleaning your Remington 1100.

Step 1: Disassemble the Shotgun

Before you can clean your Remington 1100, you’ll need to disassemble it.

1. Remove the magazine cap to access the magazine tube.
2. Pivot the fore-end away from the receiver to gain access to the bore and chamber.
3. Remove the bolt assembly by pulling it towards the rear of the shotgun.
4. Pivot the trigger group towards the rear of the shotgun to gain access to the trigger and hammer.

Step 2: Clean the Bore

Once you have the bolt assembly removed, you can begin cleaning the bore of your Remington 1100.

1. Insert a cleaning patch into the bore, using the cleaning rod.
Check out the 50 Cheapest Guns Now


2. Run the patch through the bore using the cleaning rod. Repeat this process until the patch comes out clean.
3. Insert a muzzle brush into the bore, and run it through the bore to clean out any remaining debris.
4. Run a few cleaning patches through the bore to remove any excess debris.

Step 3: Clean the Chamber

Now that the bore is clean, you can move on to cleaning the chamber.

1. Insert a cleaning patch into the chamber, using the cleaning rod.
2. Run the patch through the chamber using the cleaning rod. Repeat this process until the patch comes out clean.

Step 4: Clean the Trigger Group

The trigger group is another area that needs attention.

1. Remove the trigger assembly from the receiver by pulling it towards the rear of the shotgun.
2. Wipe down the trigger assembly using a clean cloth and solvent.
3. Inspect the trigger assembly for any debris or damage, and replace any parts that are damaged.
4. Reinstall the trigger assembly.

Step 5: Clean the Bolt Assembly

The bolt assembly also needs to be cleaned.

1. Wipe down the bolt assembly using a clean cloth and solvent.
2. Inspect the bolt assembly for any debris or damage, and replace any parts that are damaged.
3. Run a few cleaning patches through the bolt assembly to remove any excess debris.
4. Reinstall the bolt assembly.

Step 6: Lubricate the Remington 1100

Now that your Remington 1100 is clean, it’s time to apply lubricant.

1. Apply a small amount of wipe-down lubricant to the trigger assembly, bolt assembly, and any other moving parts.
2. Wipe off any excess lubricant using a clean cloth.
3. Inspect the shotgun for any remaining areas that may need lubricant.

Step 7: Reassemble the Shotgun

The final step is to reassemble your Remington 1100.

1. Reinstall the trigger group, bolt assembly, and fore-end.
2. Make sure all parts are securely in place.
3. Cock the shotgun, load a shell, and test fire it to ensure everything is functioning properly.

Tips and Best Practices

Here are some additional tips and best practices to keep in mind:

• Clean your shotgun after every use: Cleaning your shotgun after every use will help prevent corrosion and maintain its performance.
• Use the right cleaning materials: Make sure to use cleaning materials specifically designed for shotguns, as they are gentler and more effective.
• Avoid using harsh chemicals: Avoid using harsh chemicals, such as bleach or ammonia, as they can damage your shotgun’s finish.
• Store your shotgun properly: Store your shotgun in a dry, clean environment, away from direct sunlight and moisture.

In conclusion, cleaning your Remington 1100 is a relatively simple process that requires the right materials and a bit of patience. By following these steps, you’ll be able to keep your shotgun in top condition and ensure it operates reliably and accurately. Remember to clean your shotgun regularly and store it properly to maintain its performance and extend its lifespan.