How to disassemble a benelli nova?

How to Disassemble a Benelli Nova: A Step-by-Step Guide

The Benelli Nova is a popular pump-action shotgun known for its reliability, durability, and ease of use. While it’s designed for hunting and self-defense, it’s also a great platform for customization and maintenance. In this article, we’ll guide you through the process of disassembling your Benelli Nova, highlighting the key steps and precautions to take.

Before You Start

Before you begin disassembling your Benelli Nova, make sure you’re familiar with the following:

• Safety first: Always ensure the shotgun is unloaded and the safety is engaged.
• Read the manual: Consult the Benelli Nova user manual for specific instructions and recommendations.
• Gather tools: You’ll need a few basic tools, including a screwdriver, Allen wrench, and Torx driver.

Step 1: Remove the Magazine Tube

The magazine tube is the most accessible part of the Benelli Nova. To remove it, follow these steps:

• Locate the magazine tube cap: It’s located at the end of the barrel, just above the magazine tube.
• Remove the magazine tube cap: Use a screwdriver to remove the cap. You may need to apply some force, but be careful not to damage the cap or surrounding components.
• Slide out the magazine tube: Gently pull the magazine tube out of the receiver. It should slide out easily, but be careful not to touch any internal components.

Step 2: Remove the Action Bar

The action bar is responsible for cycling the pump-action mechanism. To remove it, follow these steps:

• Locate the action bar screws: They’re located on either side of the receiver, near the top.
• Remove the action bar screws: Use an Allen wrench to remove the screws. Be careful not to strip the screws or damage the surrounding components.
• Pull out the action bar: Gently pull the action bar out of the receiver. It should come out easily, but be careful not to touch any internal components.

Step 3: Remove the Trigger Group

The trigger group is responsible for firing the shotgun. To remove it, follow these steps:

• Locate the trigger group screws: They’re located on the trigger housing, near the top.
• Remove the trigger group screws: Use a screwdriver to remove the screws. Be careful not to strip the screws or damage the surrounding components.
Check out the 50 Cheapest Guns Now


• Pull out the trigger group: Gently pull the trigger group out of the receiver. It should come out easily, but be careful not to touch any internal components.

Step 4: Remove the Receiver

The receiver is the main body of the shotgun. To remove it, follow these steps:

• Locate the receiver screws: They’re located on either side of the receiver, near the bottom.
• Remove the receiver screws: Use an Allen wrench to remove the screws. Be careful not to strip the screws or damage the surrounding components.
• Pull out the receiver: Gently pull the receiver out of the stock. It should come out easily, but be careful not to touch any internal components.

Step 5: Inspect and Clean the Components

Once you’ve removed all the components, inspect and clean them according to the manufacturer’s recommendations. Pay particular attention to the following areas:

• Barrel: Inspect the barrel for any corrosion or debris. Clean it with a bore brush and solvent.
• Action bar: Inspect the action bar for any corrosion or debris. Clean it with a wire brush and solvent.
• Trigger group: Inspect the trigger group for any corrosion or debris. Clean it with a wire brush and solvent.
• Receiver: Inspect the receiver for any corrosion or debris. Clean it with a wire brush and solvent.

Reassembly

Reassembling the Benelli Nova is a reversal of the disassembly process. Make sure to follow these steps:

• Reattach the receiver: Make sure it’s properly seated and secured with the receiver screws.
• Reattach the trigger group: Make sure it’s properly seated and secured with the trigger group screws.
• Reattach the action bar: Make sure it’s properly seated and secured with the action bar screws.
• Reattach the magazine tube: Make sure it’s properly seated and secured with the magazine tube cap.

Tips and Precautions

Here are some additional tips and precautions to keep in mind:

• Always follow the manufacturer’s recommendations: The Benelli Nova manual provides specific instructions and recommendations for disassembly and reassembly.
• Be gentle: Handle the components with care to avoid damage or scratching.
• Use the right tools: Use the correct tools and techniques to avoid damaging the components or stripping the screws.
• Keep the components clean: Clean the components regularly to prevent corrosion and debris buildup.

Conclusion

Disassembling a Benelli Nova is a relatively straightforward process that requires some basic tools and knowledge. By following the steps outlined in this article, you can disassemble and reassemble your shotgun with confidence. Remember to always follow the manufacturer’s recommendations, be gentle when handling the components, and use the right tools. With proper care and maintenance, your Benelli Nova will remain a reliable and effective hunting and self-defense shotgun for years to come.

Table: Benelli Nova Disassembly Steps

Bullet Points:

• Always ensure the shotgun is unloaded and the safety is engaged before disassembling.
• Consult the Benelli Nova user manual for specific instructions and recommendations.
• Gather the necessary tools and follow the steps outlined in this article.
• Be gentle when handling the components and avoid touching internal components.
• Use the correct tools and techniques to avoid damaging the components or stripping the screws.
• Keep the components clean and well-maintained to prevent corrosion and debris buildup.