How to disassemble a Remington 1100?

How to Disassemble a Remington 1100: A Step-by-Step Guide

The Remington 1100 is a popular semi-automatic shotgun known for its reliability and durability. When it comes to maintenance and cleaning, disassembling the gun is an essential step to ensure it continues to function properly. In this article, we’ll guide you through the process of disassembling a Remington 1100, highlighting the key steps and important points to keep in mind.

Preparation is Key

Before you start disassembling your Remington 1100, make sure you have the following:

• A clean and safe work area
• A cleaning kit with the appropriate brushes and cleaning rods
• A screwdriver ( Allen wrench) for the take-down screws
• A magazine removal tool (if your gun has one)
• A pair of safety glasses and gloves

Step 1: Remove the Magazine

The first step in disassembling your Remington 1100 is to remove the magazine. To do this:

• Pull the trigger to the rear to cycle the action and eject the spent shell
• Release the trigger and pull the slide back to the rear
• Lift the magazine follower to remove the magazine from the gun

Step 2: Remove the Charging Handle

Next, you need to remove the charging handle. To do this:

• Pull the trigger to the rear to cycle the action and eject the spent shell
• Release the trigger and pull the slide back to the rear
• Lift the charging handle and pull it out of the gun

Step 3: Remove the Safety

The safety is located on the top of the receiver and is held in place by a screw. To remove the safety:

• Use an Allen wrench to remove the screw that holds the safety in place
• Lift the safety out of the receiver

Step 4: Remove the Trigger Group

The trigger group is located inside the receiver and is held in place by screws. To remove the trigger group:

• Use an Allen wrench to remove the screws that hold the trigger group in place
• Lift the trigger group out of the receiver

Step 5: Remove the Slide

The slide is held in place by screws and a spring. To remove the slide:

• Use an Allen wrench to remove the screws that hold the slide in place
• Compress the spring to release the slide from the receiver
• Lift the slide out of the receiver

Step 6: Remove the Barrel and Fore-end

The barrel and fore-end are held in place by a single screw. To remove the barrel and fore-end:

• Use an Allen wrench to remove the screw that holds the barrel and fore-end in place
• Lift the barrel and fore-end out of the receiver

Step 7: Clean and Inspect the Components

Now that you’ve disassembled your Remington 1100, it’s time to clean and inspect the components. Use a cleaning kit to clean the slide, barrel, and fore-end. Inspect the components for any signs of wear or damage and make any necessary repairs.

Reassembly

Reassembling your Remington 1100 is the reverse of the disassembly process. Make sure to:

• Clean and lubricate all components before reassembly
• Apply a thin layer of lubricant to the slide rails and receiver
• Reinstall the barrel and fore-end
• Reinstall the trigger group
• Reinstall the safety
• Reinstall the charging handle
• Reinstall the magazine
• Cycle the action to ensure everything is properly aligned

Tips and Considerations

• Always handle your Remington 1100 with care and respect
• Make sure you have a clean and safe work area before disassembling the gun
• Use the correct tools and techniques to avoid damaging any components
• Consider having a professional gunsmith disassemble and reassemble your Remington 1100 if you’re not comfortable with the process

Conclusion

Disassembling a Remington 1100 is a relatively straightforward process that requires patience and attention to detail. By following the steps outlined in this article, you should be able to successfully disassemble and reassemble your gun. Remember to always handle your Remington 1100 with care and respect, and to clean and lubricate all components before reassembly.

Table: Remington 1100 Disassembly

Bullets:

• Always follow proper safety protocols when handling firearms
• Use the correct tools and techniques to avoid damaging any components
• Clean and lubricate all components before reassembly
• Consider having a professional gunsmith disassemble and reassemble your Remington 1100 if you’re not comfortable with the process
• Always handle your Remington 1100 with care and respect