How to disassemble a Remington 870?

How to Disassemble a Remington 870: A Step-by-Step Guide

The Remington 870 is a popular shotgun known for its reliability and durability. While it’s designed to be easy to use, disassembling it can be a bit more challenging for beginners. In this article, we’ll provide a step-by-step guide on how to disassemble a Remington 870, helping you to understand the process and gain confidence in your ability to maintain and repair your firearm.

Before You Start

Before you begin disassembling your Remington 870, make sure you have the following:

• A clean and safe workspace
• A set of gun cleaning tools, including a rod, brushes, and patches
• A manual or guide specific to your Remington 870 model
• A knowledge of basic gun safety and handling procedures

Removing the Magazine Tube

The first step in disassembling your Remington 870 is to remove the magazine tube. To do this:

• Ensure the shotgun is unloaded: Before starting the disassembly process, make sure the shotgun is unloaded and the chamber is clear.
• Remove the fore-end cap: Locate the fore-end cap, which is the plastic or metal cover at the front of the shotgun. Remove it by pulling it straight off.
• Pull out the magazine tube: With the fore-end cap removed, you should be able to pull out the magazine tube. It may take a bit of force, but it should come out easily.

Removing the Bolt and Trigger Group

Once the magazine tube is removed, you can move on to the bolt and trigger group. To do this:

• Remove the bolt handle: Locate the bolt handle, which is the lever on the top of the shotgun. Remove it by pulling it straight off.
• Pull out the bolt: With the bolt handle removed, you should be able to pull out the bolt. It may take a bit of force, but it should come out easily.
• Remove the trigger group: Locate the trigger group, which is the assembly that includes the trigger, hammer, and sear. Remove it by pulling it straight out of the shotgun.

Removing the Action Bar

The action bar is the assembly that holds the bolt and trigger group in place. To remove it:

• Pull out the action bar pins: Locate the action bar pins, which are the small pins that hold the action bar in place. Remove them by pulling them out with a punch or a screwdriver.
• Pull out the action bar: With the pins removed, you should be able to pull out the action bar. It may take a bit of force, but it should come out easily.

Removing the Stock and Fore-end

The stock and fore-end are the wooden or synthetic components that make up the shotgun’s grip. To remove them:

• Remove the stock screw: Locate the stock screw, which is the screw that holds the stock in place. Remove it by unscrewing it with a screwdriver.
• Pull out the stock: With the stock screw removed, you should be able to pull out the stock. It may take a bit of force, but it should come out easily.
• Remove the fore-end screw: Locate the fore-end screw, which is the screw that holds the fore-end in place. Remove it by unscrewing it with a screwdriver.
• Pull out the fore-end: With the fore-end screw removed, you should be able to pull out the fore-end. It may take a bit of force, but it should come out easily.

Reassembly

Reassembling your Remington 870 is the reverse of the disassembly process. Make sure to:

• Apply a small amount of oil or lubricant: To the bolt, trigger group, and action bar to ensure smooth operation.
• Replace the action bar: Make sure it’s properly seated and the pins are securely in place.
• Replace the trigger group: Make sure it’s properly seated and the trigger is functioning correctly.
• Replace the bolt: Make sure it’s properly seated and the bolt handle is securely in place.
• Replace the magazine tube: Make sure it’s properly seated and the fore-end cap is securely in place.
• Replace the stock and fore-end: Make sure they’re properly seated and the screws are securely tightened.

Tips and Tricks

Here are some additional tips and tricks to keep in mind when disassembling and reassembling your Remington 870:

• Use the correct tools: Make sure you have the correct tools for the job, including a punch, screwdriver, and rod.
• Be patient and take your time: Disassembling and reassembling a shotgun can be a complex process, so take your time and be patient.
• Consult a manual or guide: If you’re unsure about any part of the process, consult a manual or guide specific to your Remington 870 model.
• Clean and lubricate the shotgun: After reassembling the shotgun, make sure to clean and lubricate it to ensure smooth operation.

Conclusion

Disassembling a Remington 870 may seem intimidating at first, but with the right tools and knowledge, it’s a process that can be completed safely and effectively. By following the steps outlined in this article, you’ll be able to disassemble and reassemble your shotgun with confidence. Remember to always follow proper safety procedures and consult a manual or guide if you’re unsure about any part of the process.

Table: Remington 870 Disassembly Steps

Bullets: Key Points to Remember

• Always ensure the shotgun is unloaded before starting the disassembly process
• Use the correct tools for the job
• Be patient and take your time
• Consult a manual or guide if unsure about any part of the process
• Clean and lubricate the shotgun after reassembly