How to disassemble an AK 47?

How to Disassemble an AK 47: A Step-by-Step Guide

The AK 47 is a legendary assault rifle that has been used by military and civilian shooters alike for decades. While it’s an iconic weapon, it’s not always easy to maintain or repair, especially for those who are new to firearms. In this article, we’ll take a step-by-step look at how to disassemble an AK 47, making it easier for you to clean, maintain, and repair your rifle.

Before You Start

Before you begin disassembling your AK 47, make sure you’re in a safe environment and that the rifle is unloaded. Always check the chamber and magazine to ensure they’re empty. Additionally, make sure you have the proper tools and a clear workspace.

Step 1: Remove the Magazine

The first step in disassembling an AK 47 is to remove the magazine. To do this, simply pull the magazine release lever located on the right side of the rifle, just behind the trigger guard. The magazine should fall out of the rifle. Make sure to catch the magazine as it falls out to prevent it from getting lost or damaged.

Step 2: Remove the Charging Handle

The next step is to remove the charging handle. To do this, pull the charging handle back and lift it out of the rifle. Be careful not to touch the trigger or any other moving parts while doing this.

Step 3: Remove the Handguard

The handguard is the outer covering of the rifle that houses the barrel and gas system. To remove it, you’ll need to use a wrench or pliers to loosen the retaining nut that holds it in place. Be careful not to damage the handguard or the rifle’s finish.

Step 4: Remove the Gas Tube

The gas tube is responsible for directing gas from the barrel to the piston and operating the rifle’s gas system. To remove it, you’ll need to use a wrench or pliers to loosen the retaining nut that holds it in place. Be careful not to damage the gas tube or the rifle’s finish.

Step 5: Remove the Barrel Nut

The barrel nut is the part of the rifle that holds the barrel in place. To remove it, you’ll need to use a wrench or pliers to loosen the retaining nut that holds it in place. Be careful not to damage the barrel nut or the rifle’s finish.

Step 6: Remove the Barrel

The barrel is the heart of the rifle, and it’s what makes the AK 47 so accurate. To remove it, you’ll need to use a wrench or pliers to loosen the retaining nut that holds it in place. Be careful not to damage the barrel or the rifle’s finish.

Step 7: Remove the Piston and Follower

The piston and follower are responsible for operating the rifle’s gas system and cycling the action. To remove them, you’ll need to use a wrench or pliers to loosen the retaining nut that holds them in place. Be careful not to damage the piston and follower or the rifle’s finish.

Step 8: Remove the Receiver

The receiver is the main body of the rifle, and it’s what holds everything together. To remove it, you’ll need to use a wrench or pliers to loosen the retaining nut that holds it in place. Be careful not to damage the receiver or the rifle’s finish.

Conclusion

Disassembling an AK 47 can seem like a daunting task, but with the right tools and a clear workspace, it’s a relatively straightforward process. Remember to always follow safety guidelines and to be careful when handling the rifle and its components. By following these steps, you’ll be able to disassemble your AK 47 and keep it in top working condition.

Important Notes

• Always follow safety guidelines when handling firearms and their components.
• Be careful not to damage the rifle or its components during disassembly.
• Use the proper tools and techniques to avoid damaging the rifle or its components.
• Always check the chamber and magazine to ensure they’re empty before disassembling the rifle.
• Make sure you have a clear workspace and a good light source before disassembling the rifle.