How to Disassemble Benelli Nova: A Step-by-Step Guide
The Benelli Nova is a semi-automatic shotgun designed for hunting, home defense, and target shooting. Its reliability and durability make it a popular choice among shotgun enthusiasts. However, sometimes it may be necessary to disassemble the gun for cleaning, maintenance, or repair. In this article, we will guide you through the process of disassembling the Benelli Nova in a step-by-step manner.
Important Safety Notes
Before disassembling your Benelli Nova, make sure to:
• Check the chamber for any rounds. Never attempt to disassemble a loaded firearm.
• Ensure the gun is pointing in a safe direction, away from people and any potential targets.
• Wear eye protection and gloves to prevent any accidental discharges or bodily harm.
• Be aware of your surroundings, making sure you are in a well-ventilated area, free from distractions.
Disassembling the Benelli Nova: A Step-by-Step Guide
Contents
- 1 Step 1: Remove the Fore-end Cap
- 2 Step 2: Remove the Barrel Nut
- 3 Step 3: Remove the Gas Cylinder and Barrel
- 4 Step 4: Remove the Firing Pin Assembly
- 5 Step 5: Remove the Trigger Group and Trigger Return Spring
- 6 Step 6: Remove the Magazine Assembly
- 7 Enhance Your Knowledge with Curated Videos on Guns and Accessories
Step 1: Remove the Fore-end Cap
- Locate the fore-end cap by feeling the gun’s ribbed section. It is usually secured by a Torx screw (T30).
- Use a Torx wrench or a suitable replacement to loosen the screw.
- Pull the cap forward and set it aside. This will expose the barrel and its surrounding components.
Step 2: Remove the Barrel Nut
- Find the barrel nut, situated at the muzzle end of the barrel. It’s secured by a Torx screw (T40).
- Use a Torx wrench to loosen the screw, taking care not to touch any of the surrounding surfaces.
- Lift the barrel nut off, taking care not to disturb the gas cylinder or surrounding components.
Step 3: Remove the Gas Cylinder and Barrel
- Locate the gas cylinder pivot pin on the left-hand side of the receiver.
- Pull the pin towards the receiver to release it from the gas cylinder and barrel.
- Lift the gas cylinder and barrel as a single unit, keeping them together as you handle them.
- Set the assembly aside, taking care not to disturb the firing pin assembly.
Step 4: Remove the Firing Pin Assembly
- Locate the firing pin, situated within the receiver’s firing pin housing.
- Pull the firing pin slightly towards the receiver to disengage it from the internal components.
- Lift the firing pin out of its housing and set it aside.
Step 5: Remove the Trigger Group and Trigger Return Spring
- Find the trigger group, connected to the receiver by two pins.
- Pull both pins out to release the trigger group.
- Pull the trigger group out, taking care not to touch any surrounding components.
- Locate the trigger return spring, connected to the trigger group and receiver.
- Pull the spring out to release it from the trigger group.
Step 6: Remove the Magazine Assembly
- Locate the magazine assembly on the right-hand side of the receiver.
- Pull the magazine shell latch back and lift it off, exposing the internal components.
- Pull the magazine out, taking care not to touch any surrounding components.
- Set the magazine assembly aside, leaving the receiver exposed.
Reassembling the Benelli Nova: A Table to Follow
| Part | Removal Method | Assembly Method |
|---|---|---|
| Fore-end Cap | Loose Torx screw (T30), pull forward | Insert from front, screw in (T30) |
| Barrel Nut | Loose Torx screw (T40), lift off | Align with gas cylinder, screw in (T40) |
| Gas Cylinder and Barrel | Lift off from receiver | Reattach pivot pin, barrel nut, and gas cylinder |
| Firing Pin Assembly | Pull firing pin out, disengage internal components | Reattach to firing pin housing, reset internal components |
| Trigger Group | Pull pins, lift out | Reattach pins, align with receiver |
| Trigger Return Spring | Pull out, disengage internal components | Reattach to trigger group, align with receiver |
| Magazine Assembly | Pull latch, lift out | Insert from rear, latch (magazine shell) |
Reassembly Tips
- Make sure all components are clean and free from debris before reassembling the Benelli Nova.
- Ensure all screws and pins are properly aligned and securely fastened during reassembly.
- Check the torque specification for the barrel nut and ensure it’s tightened correctly during reassembly.
- Inspect the firing pin for any damage or wear during reassembly, and consider replacing it if necessary.
- Follow the manufacturer’s instructions for reassembling the trigger group and firing pin assembly to ensure proper function and reliability.
In conclusion, disassembling the Benelli Nova shotgun requires a combination of Torx screws, pins, and careful handling of internal components. By following this step-by-step guide, you should be able to safely and successfully disassemble your Benelli Nova for maintenance, cleaning, or repair. Always prioritize safety, follow the manufacturer’s guidelines, and use proper eye protection and gloves during the process.
