How to reset oil change light on honda pilot?

How to Reset Oil Change Light on Honda Pilot

As a proud owner of a Honda Pilot, you would want to keep your vehicle in tip-top shape and ensure you’re staying up-to-date with regular maintenance. Sometimes, the "Oil Change" light comes on your dashboard, even when your oil levels and types match the recommended specification. When this happens, you can reset the light to erase any false warning messages or to confirm completion of your recent oil change. Let’s get started!

Why Would I Need to Reset the Oil Change Light on my Honda Pilot?

Some possible reasons why you’d need to reset the "Oil Change" light include:

• False indication: When the light flickers and goes out soon after illumination, it means the dashboard computer is updating its self-test and preparing for new data.
• Failed oil change history: Failing to upload the changed oil data, which resulted in the dash light activation.
• Oil-level sensor issues: If there’s a clogged, faulty, or stuck sensor, it will give misleading readings, thus causing false warnings.
• Bad oil: Failing oil quality or composition may generate false warnings when checked in the Honda-specific oil service interval.

These are quite common scenarios when dealing with the "Oil Change" light on Honda Pilot!

**How to Reset the Oil Change Light on a Honda Pilot

Assuming you know your VIN (Vehicle Identification Number) and have gathered the requisite information, these steps to reset the Oil Change Light on your Honda Pilot may help:

Via the HondaODS Method

1. Use the Honda HDS Programmer: You should have these tools if the dealer fitted them. Look for updates and follow steps:

   • Connect the USB cable. Ensure the interface is on the correct CAN (Control Area Network).
   • Follow the prompts or search guides for your pilot’s spec.
   • After resetting OBD-II or HDS, check via the computer for any active warnings

2. Manual Setting: Set as follows. Important for Honda Accord and Pilot, please remember:
   • Ensure accurate oil level setting in manual mode.
   • When prompted, specify oil used (API Class and Seal).
   Warning, this may re-trigger further issues! Try to save the HDS file, if possible).

Via the Dashboard Settings (NEW METHOD)

Now, to reset the dashboard oil warning light, press simultaneously (⌚️ key) – Trip / Info Settings button: (Left side of Multi-angle Rearview Monitor bezel).

Hold both presses for (4 minutes) until green lights pulse. Erase & Reset might take slightly longer.

**Key Takeaways – Before Using the Methods Main Points>

Before Proceeding:

Understand Your System

Remember that HondaODS does not guarantee any permanent clearances, given potential mechanical issues. So, the dashboard light must reset every time the specified interval goes by.

• Always Refer to the Car’s Users Manual
  and any Local Dealership Informed Opinions
  Respect All Safety Precautions!