How to take apart kimber 1911?

How to Take Apart a Kimber 1911: A Step-by-Step Guide

The Kimber 1911 is a iconic handgun that has gained a reputation for its exceptional accuracy, reliability, and durability. With its unique design and precision craftsmanship, it’s no wonder that many shooters and collectors alike are eager to get a closer look at the internal mechanics of this magnificent piece of firearms history. In this article, we’ll provide a comprehensive guide on how to take apart a Kimber 1911, highlighting the most important steps and precautions to ensure a successful and stress-free disassembly.

Before You Begin

Before we dive into the process, it’s essential to note that disassembling a firearm is a delicate task that requires caution and attention to detail. Always make sure to follow proper safety procedures, and consider seeking guidance from a professional firearms technician or the manufacturer’s instructions if you’re new to gun maintenance.

Gather the Necessary Tools and Accessories

To take apart your Kimber 1911, you’ll need the following tools and accessories:

• Kimber 1911 owner’s manual (recommended reading before disassembling the gun)
• Plinking range tool (for removing the barrel and recoil spring assembly)
Check out the 50 Cheapest Guns Now


• Magazine catch pin removal tool (for removing the magazine catch)
• Extractor and ejector removal tool (for removing the extractor and ejector)
• Torx screwdriver (for removing the slide stop lever)
• Needle-nose pliers (for removing small parts)
• Gun cleaning brush (for cleaning the disassembled parts)

Step-by-Step Disassembly Guide

Now that you have the necessary tools and accessories, let’s proceed with the step-by-step disassembly guide:

Step 1: Remove the Magazine

Remove the magazine by pulling it straight out of the magazine well. Set it aside for now.

Step 2: Remove the Slide Stop Lever

Use a Torx screwdriver to remove the slide stop lever by unscrewing it counterclockwise. Gently pull the lever out of the slide and set it aside.

Step 3: Remove the Extractor and Ejector

Use an extractor and ejector removal tool to remove the extractor and ejector by unscrewing them counterclockwise. Gently pull them out of the slide and set them aside.

Step 4: Remove the Barrel and Recoil Spring Assembly

Use a plinking range tool to remove the barrel and recoil spring assembly by unscrewing it counterclockwise. Gently pull the assembly out of the slide and set it aside.

Step 5: Remove the Slide

Remove the slide by sliding it forward off the frame. Set it aside for now.

Step 6: Remove the Grip and Mag Well

Remove the grip by sliding it off the frame. Set it aside for now.

Step 7: Remove the Trigger and Trigger Guard

Remove the trigger by pulling it straight out of the frame. Set it aside for now.

Step 8: Remove the Recoil Spring

Remove the recoil spring by pulling it out of the recoil spring guide. Set it aside for now.

Step 9: Remove the Hammer

Remove the hammer by pulling it straight out of the frame. Set it aside for now.

Step 10: Remove the Slide Stop Plate

Remove the slide stop plate by pulling it out of the frame. Set it aside for now.

Reassembly Guide

Once you’ve disassembled your Kimber 1911, reassembly is relatively straightforward. Simply follow the reverse order of the disassembly guide, making sure to tighten all parts securely in the correct sequence.

Important Reminders

• Always clean and lubricate all parts before reassembling the gun.
• Double-check that all parts are securely tightened in the correct sequence to avoid accidental discharge or damage to the firearm.
• Consider seeking professional guidance if you’re unsure about any part of the disassembly or reassembly process.

Conclusion

Taking apart a Kimber 1911 requires patience, attention to detail, and the right tools. By following the step-by-step guide provided above, you’ll be able to successfully disassemble and reassemble your Kimber 1911. Remember to always follow proper safety procedures and seek guidance from a professional firearms technician or the manufacturer’s instructions if you’re new to gun maintenance. With proper care and maintenance, your Kimber 1911 will continue to serve you well for many years to come.

Table: Kimber 1911 Disassembly Steps

Bullet Points: Key Takeaways

• Always follow proper safety procedures when disassembling and reassembling your firearm.
• Use the correct tools and accessories for the job.
• Take your time and work carefully to avoid accidental discharge or damage to the firearm.
• Consider seeking professional guidance if you’re unsure about any part of the process.
• Clean and lubricate all parts before reassembling the gun.
• Double-check that all parts are securely tightened in the correct sequence.