How to Take Bolt Out of Remington 700: A Step-by-Step Guide
The Remington 700 is a popular hunting rifle known for its reliability, accuracy, and versatility. However, sometimes taking out the bolt can be a bit tricky for some shooters. In this article, we will provide a step-by-step guide on how to take out the bolt from your Remington 700 rifle.
Understanding the Bolt Removal Process
Before we dive into the step-by-step instructions, it’s essential to understand the bolt removal process. The Remington 700 has a unique bolt design that requires a specific sequence of steps to remove. Here’s a summary of what you need to know:
- The bolt needs to be cycled out of the rifle, meaning the bolt handle needs to be pulled back to fully cock the action.
- The bolt needs to be held in the open position, which will expose the firing pin and the firing pin spring.
- You will need to pull out the firing pin spring while keeping the bolt held in the open position.
- Finally, you will be able to remove the bolt from the rifle by lifting it straight up.
Step-by-Step Guide to Removing the Bolt
Here’s a step-by-step guide to removing the bolt from your Remington 700 rifle:
| Step | Description | Pictures |
|---|---|---|
| 1 | Cycle the bolt out of the rifle | [Image] |
| 2 | Hold the bolt in the open position | [Image] |
| 3 | Pull out the firing pin spring | [Image] |
| 4 | Lift the bolt straight up to remove | [Image] |
Cycling the Bolt
To start, cycle the bolt out of the rifle by pulling the bolt handle back towards you. This will fully cock the action and chamber a round (if loaded). Make sure to hold the rifle firmly with one hand and use the other hand to pull the bolt handle back.
Holding the Bolt in the Open Position
Once you’ve cycled the bolt, hold it in the open position by pulling it back slightly and tilting it upwards. This will expose the firing pin and firing pin spring.
Removing the Firing Pin Spring
While holding the bolt in the open position, use your fingers or a thin tool (such as a screwdriver) to pull out the firing pin spring. You should see the spring slide out of the bolt.
Lifting the Bolt
Finally, with the firing pin spring removed, you should be able to lift the bolt straight up to remove it from the rifle. Apply gentle pressure and lift the bolt slowly to avoid dropping it.
Tips and Tricks
Here are a few tips and tricks to keep in mind when removing the bolt from your Remington 700:
- Always handle the rifle safely: Make sure the rifle is unloaded and the chamber is clear before attempting to remove the bolt.
- Use a proper bolt pull: Use a consistent and gentle motion when cycling the bolt to avoid scratching or damaging the action.
- Don’t force the bolt: If the bolt is stuck or difficult to remove, don’t force it. Instead, check the rifle’s chamber for obstructions or dirt accumulation and clean the action accordingly.
- Clean and maintain the rifle: Regular cleaning and maintenance will ensure smooth operation and extend the life of your rifle.
Conclusion
Removing the bolt from your Remington 700 rifle may take a little practice, but following these steps and tips should help you master the process. Remember to handle the rifle safely, cycle the bolt correctly, and lift the bolt gently to avoid damage. With regular maintenance and proper handling, your Remington 700 will continue to provide you with reliable and accurate shooting performances.
Additional Resources
- Remington 700 User Manual: Consult your rifle’s user manual for detailed instructions on maintaining and troubleshooting your rifle.
- Remington 700 Owner’s Forum: Join online forums and communities to connect with other Remington 700 owners and enthusiasts for advice and tips.
Remember, always handle your firearms responsibly and follow safety guidelines to ensure a safe and enjoyable shooting experience. Happy shooting!
